HOW TO USE CLEAN FIGHT:

TO DISINFECT HARD, NON-POROUS SURFACES:

For visibly soiled areas, a preliminary cleaning is required. Apply Clean Fight Disinfectant to hard, non-porous surfaces with a cloth, mop, or sponge. Treated surfaces must remain wet for 10 minutes. Allow surfaces to air dry.

Food contact surfaces must be rinsed with water after disinfection.

This product is not to be used as a terminal sterilant/high-level disinfectant on any surface or instrument that (1) is introduced directly into the human body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body.

This product may be used to pre-clean or decontaminate critical or semi-critical devices prior to sterilization or high-level disinfection.

TO DISINFECT HARD, NON-POROUS, ELECTRONIC EQUIPMENT:

Completely power off electrical devices prior to treatment. Pre-clean soils from external surfaces with a paper towel, cloth, or sponge, which may be dry or slightly wetted with this product.

Carefully apply Clean Fight Disinfectant using a cloth or spray device so that only enough solution is applied to keep the surface wet for 10 minutes.

Avoid over-soaking and prevent pooled or puddled areas. Reapply as necessary to keep wet for 10 minutes. Do not rinse.

Allow surfaces to air dry. If film or streaks appear after 10 minutes, wipe clean with a dry or slightly damp paper towel, or cloth.

Do not restore power to electronic equipment until thoroughly dry.

TO DISINFECT HARD, NON-POROUS FLOORS, COUNTERS, SINKS, AND BATHTUBS:

Apply Clean Fight Disinfectant to the soiled area with a cloth, wipe, mop, sponge, spray, then wipe or scrub clean. For disinfection, allow the surface to remain wet for 10 minutes.

Food contact surfaces must be rinsed with water after disinfection.

This product can be used to clean various stains and organics including the following: bathtub rings, beverage stains, blood, body oils, coffee stains, dead skin, dirt, fecal matter, fingerprints, food residue, fruit stains, grease, laboratory stains, mildew stains, mold stains, (other) common

soils and/or stains, (other) organic matter, pet odor, rust, tea (stains), urine (stains), vomit (stains).

TO DISINFECT AND DEODORIZE TOILETS, URINALS, AND BIDETS:

Remove heavy soil prior to disinfection. Empty toilet bowl or urinal and liberally apply Clean Fight Disinfectant to exposed surfaces including under the rim with a cloth, mop, sponge, or spray device until the surface is thoroughly wet. 

Allow the surface to remain wet for 10 minutes, then wipe clean.

TO DEODORIZE: 

Spray the soiled area with Clean Fight until thoroughly wet and let stand for the appropriate time, then wipe.

For visibly soiled areas, a preliminary cleaning is required.

TO CLEAN GLASS, MIRRORS, AND WINDOWS:

Dilute Clean Fight with water from 1:19 to 1:4 to prepare a 25-100 ppm available chlorine glass cleaner solution. If desired, use chlorine test strips to determine the exact available chlorine concentration. Apply glass cleaner solution to the surface with a paper towel, cloth, or spray then wipe, squeegee, or scrub clean. Residual wetness may be removed with a paper towel or cloth or just allow surfaces to air dry. If film or streaks appear after drying, wipe clean with a dry or slightly damp clean paper towel, or cloth.